Michelin 5100 Smart Jumper Cables with Surge Protection

Safer and easier to use than ordinary jumper cables

• Green LED Indicator Lights Confirm Correct Connection
• No Sparking Or Shorting When Clamps Are Attached, Polarity Is Adjusted Automatically
• Built-in surge protector prevents damage to vehicle's computer and electronics
• Cables constructed using heavy 8-gauge copper clad aluminum to ensure superior and reliable performance
• Textured grips and Insulated clamps for maximum cranking power
• 12-foot long, no matter your battery or car position opposite also able to jump start with this length.

Before using these cables, read enclosed instruction sheet.

Four Easy Step:

1. With the ignition of both vehicles in the off position, connect one set of clamps to the assisting vehicle battery, one clamp to each battery terminal - polarity doesn't matter.
2. Connect the other set of clamps to the disabled vehicle battery - the first clamp to the positive battery terminal and the second clamp to metal on the vehicle battery terminal/engine block/frame.
3. Both green indicator lights should illuminate on the center module - if not, adjust the clamps until they do.
4. Start the assisting vehicle and allow to idle for about 30 seconds. Start the disabled vehicle. When it is running, disconnect the clamp from the battery terminal/engine block/frame then disconnect the remaining clamps in any order.

Price Rm150, exclude GST